12V Micro Metal Gearing Motor 1:50

This motor is (0.365 "or 9.27 mm), D-shaped metal output shaft that corresponds to 3 mm wheel motor adapter.

Brass faceplate has two mounting holes threaded for M1.

The screws are 1.6 mm diameter, 0.35 mm Pitch. Or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely attach the gearmotor.

We recommend an extended mounting bracket for recessed wheel hubs.

Features:

• 50: 1 gear ratio
• Idle speed 200 rev. / Min. @ 6
• Rated speed 600 rpm. / Min. @ 6
• Current Rating 0.095A @ 6
• Rated torque 0.05 kg. cm @ 6