1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low power dual core 32 bit CPU
Up to 240MHz, up to 600 DMIPS
Built in 520 KB SRAM, external 4M PSRAM
Supports interfaces like UART/SPI/I2C/PWM/ADC/DAC
OV2640 and OV7670 cameras with built-in flash,
WiFI image upload,
TF card,
Multiple sleep modes,
Embedded Lwip and FreeRTOS,
STA/AP/STA+AP working mode,
Smart Config/AirKiss One-click distribution network,
Serial local upgrade and remote firmware upgrade (FOTA),
Turn off the flash: 180mA@5V Turn on the flash and adjust the brightness to the maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Moderm-sleep: up to 20mA@5V Light-sleep: up to 6.7mA@5V
Security
WPA/WPA2/WPA2-Enterprise/WPS
Power supply range
5V
Operating temperature
-20 °C ~ 85 °C
Storage environment
-40 °C ~ 90 °C, < 90%RH
ESP32-CAM Picture Output Format Rate:
QQVGA
QVGA
VGA
SVGA
JPEG
6
7
7
8
BMP
9
9
-
-
GRAYSCALE
9
8
-
-
Test environment: camera model: OV2640 XCLK: 20MHz, the module transmits pictures to the computer browser by WiFi.
Validate your login
Sign In
Create New Account