This module plugs into a solderless breadboard alongside a NanoCore12ST or neCore12 module, providing a USB interface and power. It features an on-board 3.3V regulator, and offers selectable 3V/5V power for your target from the USB port, with fuse protection. Compact layout, features a 2-pin power connector designed to plug directly into your breadboard's power and Ground bus strip.
Features:
provides USB-to-TTL interface function for any TTL NanoCore12 or TTL neCore12 MCU module (not compatible with RS232 versions)
brings out TTL levels of TXD, RXD, and DTR signals
based on FT232R chip made by FTDI
brings 5V from USB to power target (jumper selectable)
on-board 3.3V regulator can supply target power for low-voltage operation
standard miniB USB connector
green and yellow activity LEDs provided for RX and TX monitoring
500mA polyfuse protects host computer's USB port from accidental shorts
small footprint (0.725x0.85 inches; 18.5x22mm)
4-pin row on 0.1" centers lines up with target module pins 1 through 4 via solderless breadboard
2-pin power connector plugs into solderless breadboard power bus strip (compatible with most breaboards)
jumper selectable 3.3V or 5V (or none)
Your target board and attached circuitry can draw up to 500mA from a USB port on your computer; less, if it is plugged into a hub
Please complete your information below to login.
Sign In
Create New Account