Learning method:
A: Momentary-----------press the learning button (1CH) once, the LED indicator will flash, then press the transmitter button A, until the LED stops, meaning button A learned successfully. 2CH is the same as 1CH.
B: Toggle------------press the learning button 3 times, the LED indicator will flash, then press the transmitter button A, until the LED stops, meaning button A learned successfully. 2CH is the same as 1CH.
C: Latched------------- press the learning button twice, the LED indicator will flash, then press the transmitter button A, until the LED stops, meaning button A learned successfully. 2CH is the same as 1CH.
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle---------------Press transmitter button A once, the receiver relay A is ON, press button A again, the receiver relay A is OFF,
Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF. The relay B is ON .
Clearing Code
Keeping press the Learning Button on the receiver until the LED indicator OFF, the code will have been cleared successfully.
1, Operating voltage |
DC12V |
2, Operating frequency |
315/ 433.92 MHz |
3, Frequency deviation |
± 0.2MHz |
4, Operating temperature |
-40’C ~ +80’C |
5, Receiving sensitivity |
108dBm |
6, Modulation |
AM |
7, Signal output method |
L4:Latch-signal,M4:Momentary-signal,T4:Toggle-signal |
8, Decoder chip |
fixed code (PT2272/ PT2262/PT2264/SC2262 ),learning code(EV1527), |
9, Size (L*W*H) |
68*48*16.8mm |
Validate your login
Sign In
Create New Account