2 Level Water Level Pump Control

Technical Specifications:

• - Power requirement : 12VDC.
• - Consumption : max. 50mA.(working), max. 11mA.(Standby).
• - Can set the operation of the relay to empty or fill the water tank.
• - Contact Load : 1A. @ 220VAC
• - PCB dimensions : 2.61 x 1.32 in.

  Note* The relay contacts can switch from a few volts AC to 240 VAC or DC.
  The voltage that you put in, is what will output to your load.
  If you apply 110VAC, then 110VAC will be switched to your load.