BH1750 16-Bit Serial Output Light LUX Sensor Module

The GY-302 from CJMCU is an I2C board that allows you to measure the amount of light using the BH1750 photodetector.

Communicates via the I2C bus with the Arduino or ESP8266.

Wide range and High resolution. ( 1 – 65535 lx )

• Operating voltage (VCC): 3 V to 5V
• Operating current: 120uA (typ) 190uA (max)
• Operating Temperature: -40°C ~ 85°C
• Sensor Resolution: 16 Bits
• Peak wavelength: 560nm
• Interface Type: I2C
• I2C Device Address: 0x23 (when ADDR = LOW) or 0x5c (when ADDR = HIGH)
• On board Level Translators: No (requires level translator for 5V logic interface)
• I2C Maximum Clock frequency: 400KHz