DeoxIT Liquid w Brush Applicator

DeoxIT® D-Series D100L Brush Applicator, 100% solution, 7.4 mL

DeoxIT® D-Series – Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant

Part No. D100L-2DB:
100% Liquid, No solvents, 7.4 mL

Applicator: Brush, provides NO flushing action, applies 100% DeoxIT®,
Formulation:   100% DeoxIT®.
Use: When contact and connector are easily accessible. No flushing action.  
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.  Wipe off and re-apply DeoxIT®.

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.

• KEY FEATURES:
  • Improves Conductivity
  • Deoxidizes, Lubricates and Protects
  • Reduces Intermittent Connections
  • Reduces Arcing & RFI
  • Reduces Wear & Abrasion
  • * Temperature Range, -34 C (-29 F) to +200 C (400 F)

  * NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended;