Hi Welcome to QKits
 

 

0 $0.00

You have no items in your shopping cart.

section

 
  Shipping Logos
 
 
        QKits Electronics custom PCB work in Canada
 
  Free Shipping Image

Prolific USB to serial cable image Zoom

USB to serial Cable with dupont connectors, Prolific driver USB2RSDP

SKU: USB2RSDP
USB to Serial cable with Dupont pins

Availability: Out of stock

$3.95

SKU:USB2RSDP

  • Buy 2 for $3.50 each and save 12%
  • Buy 5 for $3.00 each and save 25%
Product Description

    Details

    Uses Prolific USB driver IC.
    USB to Serial Adapter with Dupont style female connections. 
    Converts one USB port to serial TTL level out .
    RS-232 data & signals: TX, RX and GND.
    Supports 300 to 128,000 baud.
    Supports Windows 7/Vista/XP/Server2008/Server2003/2000/98 (32-bit), Windows 7/Vista/XP/Server2008/Server2003 (64-bit), Win CE, Mac, and Linux.
    Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    Port-powered, no external power required.
    No IRQs required, no IRQ conflicts.
    CE/FCC/RoHS.
    5-year manufacturer's warranty.

    SPECIFICATIONS

    Compatibility: USB 2.0 (backward compatible) and EIA/TIA RS-232C standards

    Power Source: Port power from USB port

    Current Consumption: Less than 100mA

    Output Power on Pin 3: About -9VDC

    Baud Rates: 300 to 128,000bps (auto-sensing and self-adjusting)

    Distance: USB side: 10ft (3m); RS-232 side: 16ft (5m)

    Connectors: USB side: Type A Female; serial side Dupont style female pins

    Dimensions (H x W x D): 0.6 x 1.4 x 2.2 in (15 x 35 x 55 mm) (excluding cable)

    Cable Length: 3.3ft (1m)

    Weight: 2.6 oz (73 g)

    Operating Temperature: 32ᄎF to 95ᄎF (0ᄎC to 35ᄎC)

    Operating Humidity: Up to 90% RH (no condensation)


    CONVERTER CONNECTOR PINOUTS USB Side USB Type A Connector (view from front) RS232 Side


    Pin .. Function ... Description
    1 ..... DCD ......... Data Carrier Detect
    2 ..... RX ............ Receive Data
    3 ..... TX ............ Transmit Data
    4 ..... DTR .......... Data Terminal Ready
    5 ..... GND ......... Ground (Signal)
    6 ..... DSR .......... Data Set Ready
    7 ..... RTS .......... Request to Send
    8 ..... CTS .......... Clear to Send
    9 ..... RI ............. Ring Indicator DB-9 Male (view from front)


    DB-9 / DB-25 CONVERSION TABLE (DTE)
    DB-9 Pin Assignment: 1 2 3 4 5 6 7 8 9
    DB-25 Pin Assignment: 8 3 2 20 7 6 4 5 22
    Function: DCD RX TX DTR GND DSR RTS CTS RI


    TROUBLESHOOTING INSTRUCTIONS FOR USB TO RS232 CONVERTER 1) Driver installation Make sure that the USB-232-1 is connected to your USB port, and the driver is installed correctly (as shown above); otherwise, please reinstall the driver (refer to user manual for details). 2) Make sure the Power LED on USB-232-1 is lit up. 3) Loopback Test

    * Connect pin Tx and Rx of the serial connections. * Run 232Analyzer FREE version software on your computer. * Select "ASCII" for both the Send and Receive data formats. Then send command and/or string such as "CommFront" from the 232Analyzer software. You should receive an echo of the command/string sent ("CommFront"). By performing a simple loopback test like this, you can test both the transmitter and receiver of the converter. This is very helpful when you are in doubt about the performance of your converter.

     

Additional Information

    Additional Information

    SKU USB2RSDP
Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab