12 volt Mini thermostat LED

SKU
12THM1
In stock
$6.95
  • Buy 10 for $6.50 each and save 6%
-
+
Overview
Mini LED digital thermometer with high set point display and lo set point display.

Mini LED digital thermometer.

DC12V  Intelligent Digital Thermostat Temperature Controller with NTC Sensor W1401

 

Description:

 

  • Temperature range: -9 to 99 centigrade 
  • Accuracy: 1 centigrade 
  • Control accuracy: 1 centigrade 
  • Setting Range: -9 - 99 centigrade 
  • Sample rate: 0.5S
  • Input Power: DC12V
  • Output: relay output, capacity 220V 10A / 12V 10A
  • Environmental requirements: -10 - 60 centigrade 
  • Humidity: 20% -85%
  • Size: 78x51mm
  • Temperature sensor: NTC(3950-10k 1%)
 
 
 
 
Red start Indicator:
  • START (red) indicator light, which means that the relay is ON closed.
 
Green stop light:
  • STOP (green) light is on, which means that the relay is (OFF or OPEN) disconnected.
Digital Display
  • The LED display in the middle is for the current temperature, the left green display is ON temperature, the right side display is the set STOP/OFF temperature.
 
 
Operating Instructions
 
1 High temperature start:
 
  • Set the starting temperature value > stop temperature value,
  • When the detected temperature ≥ start temperature, the relay is closed (ON).
  • When the detected temperature ≤ stop temperature, the relay is open (OFF).
  • For example: Set the starting temperature is 30 centigrade , stop temperature is 25 centigrade ,
  • When the detected temperature ≥ 30 centigrade , the relay turns ON (closed), the start Indicator (red) lights;
  • When the detected temperature value ≤ 25 centigrade the relay turns off, STOP/OFF Indicator (green) light is illuminated.
     
 2 cold start: start temperature set value
  • When the detected temperature ≤ start temperature relay is ON (closed).
  • When the detected temperature ≥ stop temperature, the relay turns off, the heating device is stopped.
  • For example: Set the starting temperature to 25 centigrade , stop temperature to 30 centigrade ,
  • When the detected temperature value ≤ 25 centigrade , the relay is ON (closed), the start Indicator (red) lights;
  • When the detected temperature ≥ 30 centigrade , the relay turns off, stop Indicator (green) lights.
 
3 set to start when the temperature value = stop temperature value, the relay off