DC Chasing Light Module

SKU
FA144
In stock
$17.95
-
+
Overview

DC Chasing Light Module, 6 Programs
4 Ch. 12V 100W


Fully Assembled and Tested

This versatile, low voltage, driving circuit features 6 switch-selected, programmed chaser sequences. Four LED indicators monitor each power output. The rate at which each sequence progresses may be adjusted by using the on-board potentiometer.

  • Sequence 1. The outputs are stepped through turning ON and OFF in ascending order from 1 to 4, and then stepped in descending order through output 4 to 1, then all outputs are turned ON for one step period and then turn OFF before repeating the sequence.
  • Sequence 2. Outputs are turned ON and OFF in ascending order 1 to 4 and then all outputs are turned on for one step period, then the sequence will repeats.
  • Sequence 3. Outputs 1 and 3 are alternately flashed with outputs 2 and 4.
  • Sequence 4. Outputs are stepped On and OFF through from 1 to 4 then back down to 1 and the pattern is repeated. Sequence 5. Outputs step through from 1 to 4 sequentially and then back down to 1. The outputs are then turned OFF for one step period before output 1 turns on and then the sequence will repeats.
  • Sequence 6. The outputs are repeatedly stepped through from 1 to 4 in ascending order.

Technical Specification

  • Power Supply : 12 VDC @ 40mA max.
  • Power Output : 25Watt @ 12VDC per Channel
  • Unit Dimensions : 3.44" x 2.60" x 1.1" (incl.components : 87.5mm x 66mm x 28mm)
  • This circuit can connect 25 Watt bulb for 4 channels, totalling 100 Watts max.
  • Fits in : FB04