Hi Welcome to QKits


0 $0.00

You have no items in your shopping cart.


  Shipping Logos
  Celebrating 21 Years
                   We do custom work
  Free Shipping Image

DRV8825 Motor Stepper Driver plus A4988 Zoom

DRV8825 Motor Stepper Driver plus A4988

SKU: A4988+DRV8825
A4988 and DRV8825 Stepper Driver Board for your 3D Printing, Arduino, Robotics, Raspberry Pi or other projects

Availability: In stock



Product Description


    High quality stepper driver carrier board supporting both A4988 and DRV8825 stepper driver modules, and providing a super simple  STEP / DIRECTION micro controller interface. Great for Arduino and Robotic projects. Photography motion rigs, factory automation / general CNC use, 3D Printing, really any application that needs to control a bipolar stepper motor (easily the most popular type) in the voltage range of 9VDC to 45VDC with drive current up to 2.5A.


    The two plug in driver options offered with the main carrier board of this listing are A4988 and DRV8825 based boards. Both of these driver modules have seen extensive use, and are proven performers in precision CNC motion applications; most notably in the field of 3D Printing where you will find just about every 3D Printer design using some variant of either module.

    Driver Module Attributes:
    • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motors rated voltage to achieve higher step rates
    • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
    • 45 V maximum supply voltage
    • Built-in regulator (no external logic voltage supply needed)
    • Can interface directly with 3.3 V and 5 V systems
    • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
    • Short-to-ground and shorted-load protection
    • 4-layer, 2 oz copper PCB for improved heat dissipation
    • Exposed solderable ground pad below the driver IC on the bottom of the PCB

      In the wiring page, connect blue line to digital pins, red and black lines to power pins VCC and GND, grey pins can leave it to float.

    Each driver module is pin compatible and they share a lot of common function. Below we have mapped out the distinguishing attributes to consider when deciding on the best module for your particular application. Of course if you have any application specific questions, please feel free to message us anytime…

    A4988 Driver Module:

    Drive Voltage: 9VDC to 35VDC (MAX)

    Drive Current: Up to 2A

    Micro Stepping: Full, Half, 1/4, 1/8, 1/16

    DRV8825 Driver Module:

    Drive Voltage: 9VDC to 45VDC (MAX)

    Drive Current: Up to 2.5A (@ 24VDC)

    Micro Stepping: Full, Half, 1/4, 1/8, 1/16, 1/32

    Power Pins:
    5V - 5V Module Power
    GND - Common Ground
    9V - 9VDC to MODULE_MAX VDC - Stepper Drive Voltage
    Control Interface Pins:
    Enable [E] - High / Low => Enable / Disable Stepper Module
    Direction [D] - High / Low => Forward / Reverse Direction
    Step [S] - High / Low =>Perform step
    Stepper Output Pins (Left to Right):
    2B - BLACK / RED
    2A - GREEN / GREY
    1A - RED / YELLOW
    1B - BLUE / GREEN
    *** Confirm correct stepper module orientation BEFORE applying power.
Additional Information

    Additional Information

    SKU A4988+DRV8825
Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab