8 x 8 LED matrix

SKU
8X8MATRIX
In stock
$6.25
  • Buy 2 for $6.00 each and save 4%
-
+
Overview
8×8 Matrix RGB LED Common Anode Diffused full Color

64 RGB LED's on a square PCB 2088RGB

The pins are matrixed so there are only 32 pins.

Specifications (IF = 20mA)

  • Forward voltage(RED): DC 2.2V

  • Forward voltage(GREEN): DC 3.3V

  • Forward voltage(BLUE): DC 3.3V

  • Luminous intensity(RED): 140mcd

  • Luminous intensity(GREEN): 280mcd

  • Luminous intensity(BLUE): 80mcd

  • Wavelength(RED): 620~622.5nm

  • Wavelength(GREEN): 520~522.5nm

  • Wavelength(BLUE): 465~467.5nm

Requires 5V at 3A minimum.  You can find the power supply here: PS530

If you have a 12V battery source you could use our LM2596S regulator. Use one regulator per matrix to supply it with a regulated 5 volts.

Two 3-pin connectors on board for wiring to your Arduino board. Solder a connection to the input and power with 5VDC to the +5V and ground pins. Connect the DIN pin to your Arduino and make a common ground from the 5V source to your Arduino or microcontroller board.