Earning 9points for this item
Eight-way relay card. This card includes a relay driver allowing a very wide range of input configurations.
The driver allows direct connection to many logic families, industrial sensors (NPN or PNP) dry contacts or voltage outputs.
Each relay has HI and LO input terminals.
The relay is activated when the HI terminal is driven high or the LO terminal is driven to a low voltage.
Each channel has an indicator LED.
A 3.5 mm hole in each corner allows easy mounting on a panel.
Please note that wiring high voltage can be dangerous.
If you are unsure, contact an electrician to ensure your installation is safe and meets relevant specifications.
| Supply Voltage: | 11.3 to 13.2 VDC |
|---|---|
| Supply Current: | ~2 ma/channel + ~32 mA/active relay |
| Low Input Activation Voltage: | d0.8 VDC |
| Low Input Voltage Range: | 0 V to Supply Voltage |
| High Input Activation Voltage: | e2.4 VDC |
| High Input Voltage Range: | 0 V to Supply Voltage |
| Output Form: | 1-Z SPDT (NO & NC) |
| Output Switch Voltage: | 277 VAC |
| Output Load Current: | 10 A (240 VAC), 8 A (24 VDC) |
| Output Switching Power: | 3,000 VA |
| Relay Coil to Contact Isolation: | e5,000 VAC (1 minute) |
| Relay Open Contact Isolation: | e1,000 VAC (1 minute) |
| Relay Contact to Contact Isolation: | e2,500 VAC (1 minute) |
| Relay Contact Resistance: | d50 mﾩ |
| Dimensions: | 45 89 50 mm |
This card is also available in a Dual channel version: RLC122 and Four channel version: RLC124
The relays used are Goodsky RW-SS-122D
Each single pole changeover relay contacts SPDT will switch 10A/24VDC , 10A/110VAC, 5A/240VAC.
Coil Resistance for the relays is 400ohm(12V), 1600ohm(24V)
A LED shows the state of each relay.
The Relay Cards are available in 12VDC or 24VDC
Four 3.5mm holes in each corner allow easy mounting on a panel
Dimensions of card
8 relay card - 174(L) x 71(W) x 20(H)mm
DIN RAIL MOUNT FOR RLC128 DIN128
Validate your login
Sign In
Create New Account