Hi Welcome to QKits


0 $0.00

You have no items in your shopping cart.


  Shipping Logos
        QKits Electronics custom PCB work in Canada
  Free Shipping Image

16 Channels Servo Motor Steering Gear USB Controller Driver Module for Robot MCU Zoom

16 Channel Servo Motor Steering Gear USB Controller Driver Module for Robot MCU

16 Channel Servo Controller

Availability: In stock



Product Description


    16 Channel Servo Motor USB Controller Module for Robot experimenting from a PC

    Features :

    •  Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. (USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been damaged by the reverse voltage to the  USB port.)
    •  Servos power supply: DC (depends on the motors, generally 5V DC)
    •  Number of channels: 16. (can be controlled at the same time and the accuracy can be adjusted)
    •  Communication Input: USB or UART (TTL or USART). (Bluetooth or some other wireless module can be used to make the controlling)
    •  Signal Output: PWM (Accuracy 1us).
    •  Servo motor resolution: 1us, 0.09 degrees.
    •  Baud Rate: 9600,19200,28400,57600,115200,128000(recognized automatically)
    •  Servo motors supported: Futaba, Hitec or some other Servos Motor controlled by PWM.
    •  Control mode: USB and UART (TTL) to accept command.
    •  Flash: onboard 512K ROM (If every command is used to control the motors at the same time,more than 500 commands can be saved.)
    •  Dimension : 51mm x 43.5mm x 1.6mm

           Remind me to upload the softwarefor this module.

    Package Content:

    • 1 x  16 Channel Servo UART USB Controller board with High Speed USB 2.0  Cable
Additional Information

    Additional Information

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab