QKits Electronic Kits: K4100, Pre- Amplifier kit

A control or pre-amplifier is an indispensable device for controlling a power amplifier, such as e.g. our K4040 tube amplifier or K4020 /K4010 MOSFET amplifiers. OR our Digital FM Tuner K4500. When developing this pre-amplifier we opted for DIGITAL control of all functions, so that it contains no potentiometers at all! All functions, such as volume, tone control, balance and input selection can be operated using push buttons and a LED display gives a clear indication of all settings. All functions may be operated with a remote control unit (K4101 available as an option). A switched mains output has also been provided, which allows the rest of the installed equipment to be switched on and off using the remote control unit. On top of all this, your own priority settings can be programmed in, which becomes the default setting when the unit is switched on, and can be invoked at any time.

Technical specifications

Input Sensitivity
PHONO 5mV/50Kohm
C.D. 500mV/32Kohm
TUNER 360mV/22Kohm
TAPE 1 360mV/22Kohm
TAPE 2 360mV/22Kohm
Rated Output Voltage
LINE 1.0V
TAPE 360mV
EQUALISER 180mV
Overload
PHONO 40mV
C.D. 3.5V
TUNER 2.5V
TAPE 1 2.5V
TAPE 2 2.5V
EQUALISER 2.5V
Signal/Noise Ratio
PHONO 75dB (A weighted/rated output)
TAPE/CD/TUNER 100dB (A weighted/rated output)
Tone Control
BASS +/-15dB (100Hz) in 2.5dB steps
TREBLE +/-15dB (10KHz) in 2.5dB steps
Total Harmonic Distortion 0.01%
Frequency Response 8 - 150KHz (-3dB)
Channel Separation 90dB
Crosstalk Between Inputs 98dB
RIAA Deviation +/- 0.5dB (20- 20KHz)
Muting -68dB
Volume from -68dB to +10dB in 2dB steps
Balance from 0 to -38dB in 3dB steps
Headphone Output Power 280mW in 32 Ohm
Mains output 5A Switched
Power consumption max 6W
Dimensions (WxHxD) aprox. 420X50X350mm
Weight aprox. 5Kg
All rights of modification reserved

	~ Celebrating 12 Years of QualityKits in 2008 ~		20-Nov-2008