Specification:
- supply voltage : 12VDC / more than 1A.
- music power output : 15Wrms @ 4ohms (BTL)
- total harmonic distortion (THD) : 0.1% @ 1W, 4ohms
- dimension : 4.10 x 2.31 inches.
Two input selection can be operated using PUSH-ON PUSH-OFF switch

Capable of delivering 15 Watts RMS at 4 ohms BTL (bridge tied load), approx 7 Watts into 8 ohms.
Do not connect either speaker terminal to ground this will result in a damaged audio amplifier IC.

Aux stereo input combines left and right channels into one mono signal.
Has a microphone or line input selection switch.
Mic input has its own level adjust control.
Includes Bass and treble control as well as a volume control.
Will operate from 10 volts DC up 15 volts DC.

Heatsink measures 55mm x 35mm high x 20mm thick or 2 1/4 inchs by 1.5 inchs by 3/4 of an inch thick.

PCB measures 105mm x60mm or 4 1/8 of an inch by 2 1/4 inchs.

The shafts on the pots stick out 15 mm or 5/8 of an inch.
4 mounting holes are provided at each corner.

Recommended housing: FB10

Check out these related products:
Mono Power Amplifier, Tone Control, Volume