Standalone Access Controller
Easy and simple to use
Accept up to 2730 cards
Delete/remove individual ID card number

1. INTRODUCTION
AL2730F is a low cost proximity card access controller with dual output for external controlling.

One output from the relay directly with NC and NO connection.

The other is a power output for driving electric lock.

It can accept a maximum of 2,730 proximity cards.

A 9 to 12V DC supply is required to power the unit, which has a current consumption of less than 200mA.

A 9VDC/300mA (2.1mm center positive) plug pack will do fine.

Fully Assembled and mounted in a plastic enclosure.

Provides performance and reliability with a stylish appearance

Provides a keyless environment without card slot and associated maintenance costs

Mount directly on electrical box for easy installation

Power supply 9 to 12V, 300mA

High reliability and consistent read range

LED Indicator : Green and Red

Size : 116.5mm x 117mm x 21mm

Color : Grey

FlexProx Standalone Proximity Card Access Controller

2. QUICK START

2.1 Configuring the jumper blocks according to your needs (see section 3).

2.2 Remove all authorized key card (see section 5.4).

2.3 Use the ACTION card to authorize the ID cards (see section 5.3).

2.5 Record the ID card number with the user name.

Present a card to the AL2730F. The green LED and relay will turn on as set by TMR0, TMR1 and TMR2 with a beep sound, indicating that the card is an authorized key card.

On the other hand, if an unauthorized card is presented to the AL2730F, the green LED and the relay will have no action but with a long beep sound.