This is a fully assembled module, ready to use. Comes with a 12vDC battery, and plastic housings.

This is a fully tested and assembled module. Comes with a plastic casing and 12vDC battery. 2 channel, 310MHz. Comes with a chain.

Control the state of a relay with a load of up to 10A, like a garage door opener, for example.

Assembled Product

2 illuminated button quiz controller board.

Reaction Timer Control Board for MX025

Event counter with relay outputs

6 channel assembled IR transmitter

Six channel receiver with 4 possible transmitter ID.

4 output, 12 Volt signal generator

Assembled K8021 - High End Pre Amplifier

PROFESSIONAL DYNAMIC BLACK MICROPHONE WITH CARRY CASE

Professional Dynamic Microphone with case

AC infrared remote switch, 500 Watt maximum load.

Infrared Remote Switch for Universal Remote, power supply 110V AC or 220 V AC, select 50 - 60 Hz, max load 500W.

Fully Assembled & Tested Module

400 MHz, distance between Transmitter and Receiver 20 Meters.

Fully Assembled & Tested Module

CANNOT SHIP TO USA DUE TO FCC REGULATIONS

1 Channel Relay Card with toggle mode for use with MX015 and MX013.

UHF Tx/Rx, 500 W max output load, power supply 12VDC/max 40mA.

Fully Assembled & Tested Module

4 Channel Relay Card can be connected to the parallel port of a standard PC-AT from type 286 and on, but this module does not come with the parallel connector.

Power supply 12VDC / max 160mA.

Fully Assembled & Tested Module

Detects revolutions per minute from 100 to 60 000 RPM!

Fully assembled & tested module

4 Channel Telephone Line Remote Control with 4 relay outputs!

Operation protected by user defined code.

Fully Assembled & Tested Module

Record your 20 second message from either the on-board mic, or the line in.

Fully Assembled and tested module.

90 second voice recorder for up to 6 messages! Onboard amplification for a small speaker, plus line-level output for connection to your own amplifier (such as store PA system, house amplifier, etc). You can record from either the onboard condensor mic, or in from your own mixer or amplifier!

This, like all the MX modules come fully assembled and tested, just like you see in the picture.

Audio power amplifier built-in, output power 15W / 4ohms. You can select the record signal from either the MIC or the LINE IN.

Fully assembled and tested module

Keep your Ni-Cads charged up with this. 0 - 4 A. (4 - 8 Cell Ni Cad) digital pulse charger.

This is an assembled module. You just need to wire it to your batteries and provide a suitable 12VDC power supply

This UHF Remote Control module has a 20 meter range from transmitter to receiver.

Fully Assembled and tested module

CANNOT SHIP TO USA DUE TO FCC REGULATIONS

Time interval (without modifications) is adjustable from 3 to 30 seconds for intermittent wiper function.
Fully Assembled Module

This circuit will detect flame. You just need to attach a probe, as well as an alarm or device to the relay terminal.

Fully Assembled and Tested Module

5 channel Mini Surround Sound Module can split the signal to fronts, rears and sub woofer outputs (Line level outputs)

Fully Assembled and Tested Module

You can mix 3 mono mic channels, adjusting the volume of each channel separetely, as well as a stereo input signal from cd player, or tuner.

Fully Assembled and tested module

Infra red repeater module that can transmit up to 5 meters.

Fully assembled and tested module

Protect your phones against an unexpected surge.

Fully assembled and tested module

Requires 12vDC 46mA max, with a maximum load of 500 watts.

Fully assembled and tested module

Mini PABX (Private Automatic Branch Exchange)

Plug this into your house AC (both 110AC, and 220AC, transformer is included), and into your telephone line

You can have up to four telephones on your new network!

Fully assembled and tested module

Peltier Thermo-Electric Cooling Module 3A

434 MHz four button transmitter module

434MHz UHF 2 Channel Receiver Module for QA17TX

One side heats and the other cools when up to 13V DC is applied to this module. Maximum of 59 deg. C. Draws up to 4.4A. Make your own portable cooler or hand warmer. No moving parts, fumes or circuit. Dimensions: 40 x 40 x 4 mm